|
|
#1
GView can install into the PDA, but can�t find the GView program.
#2 Please give user
the SmartPhone beta program for testing.
Note:
1. GView install only support the Intel StrongARM CPU
and the Intel XScale PXA Series CPU.
2. GView program is only able to run in WinCE3.0 and
PocketPC 2002/2003.
Why does GView unable to
see the camera name?
Ans: There are three reasons that will cause
the camera name is unable to be viewed.
1. Version 5.3 GView connect to version 5.21/6.0
server.
2. Version 6.0 GView connect to version 5.21 server.
3. Port 4550/5550 are closed.
Note: It will take
about 20 to 30 seconds when version 5.3 GView connect to Version 6.0 server.
G-View comparability test form for Webserver
How to use PDA GView?
Server Setup Steps:
Step1. Check the [Create JPEG/GIF file] column
in your DMRS System's WebCam Server Setup.
Step2. Press the [Server Setup] button. Then input the IP address (Domain name) in the [Assign GateWay IP Address] column.
PDA Connect Steps:
Step1. Click the [GView] icon in your PDA to
start GView application.
Step2. Click the [Connect] button located at the lower left corner of the screen.
Step3. Input the IP address of the DMRS System you wish to connect to in the [IP Address] column, enter a valid users ID and password then click [OK].
Step4. If login successfully, you will be able to see the video coming to your PDA.
